DISASSEMBLY
1. TILT/SWIVEL REMOVAL 1) Set the monitor face downward. 2) Pressing the latch (a), carefully remove the Tilt/Swivel by pulling it upward. 2. BACK COVER REMOVAL 1) Remove four screws (a). 2) Slide the Back Cover away from the Front Cabinet of the monitor.
(a) (a) (a) (a) (a)
3. TOTAL CHASSIS ASSEMBLY REMOVAL 1) Remove connector (a) from the DY Assembly screw. 2) Disconnect P2(CDT EATH) and four pins (b) from the Video PCB. 3) Carefully separate the CDT Board Assembly from the CDT neck. 4) Discharge the remaining static electricity by shorting between the Anode Cap and the CDT ground. 5) Disconnect the Anode Cap from the CDT. 6) Disconnect P902 (Degaussing pin), P701 (DY pin), and P501 from the Main PCB. 7) Remove four screws (c). 8) Remove the Total Chassis
M ENU SEL
